ON: Velocity Control on. Songs are played in a lower volume level
when strike pad with slight strength whereas songs are played in a
loud volume level when strike pad with big strength. At the
meanwhile, the specified value of “Volume” menu (the next level
menu) cannot effect.
OFF: Velocity Control off. Songs are played with the fixed volume
level no matter what degree of strength you strike on pads. You can
specify volume level on the next level menu “VOLUME”
Restrig and RstTime:
When the Song type you have selected is:
Drum Voc:
Definition: Whether sound drum voice when triggering a Song
Pattern by striking a drum pad.
ON: Sound Voice on. When striking a drum pad, also can hear the
drum voice.
OFF: Sound Voice off. Only trigger a Song Pattern without hearing
the drum voice.
Note:
Above parameters only effected when PAD PATTERN function is on.
(Set PATTERN: ON.)
3. Exchange the Order of User Kit
In order to make your performing procedure more conveniently
and smoothly, we have programmed this order exchange function
in this digital drum. Following operations below:
1. Select a user kit.
2. Enter the exchange page.
Press the [MENU] button, and use [PAGE +]/ [PAGE -] button
to enter the “EXCHANGE” page.
3. Press the [SAVE/ ENTER] button to enter exchange order
operation and press [+][-] to choose the target kit;
4. Press the [SAVE/ ENTER] button again to confirm the
operation, and now press [EXIT] button will back to
“EXCHANGE” page.
Note:
The LCD currently display “EXCHANGE OK!” page for 2 seconds,
and then back to the main display automatically, and original Kit is
selected. (For example: "MyKit001".)
4. Rename a User Kit
Rename a user kit is available, following operations below:
1. Select a user kit.
2. Enter the rename page.
Press the [MENU] button, and use [PAGE +]/ [PAGE -] button
to enter the “RENAME” page.
3. Press the [SAVE/ ENTER] button to enter rename operation.
You can refer to “Rename” procedures in the basic operation.
Kit
15
Type
Loop
Tap
Hit
Description
The RstTime is invalid. (“--”)
The Retrig is invalid. (“--”)
Both RstTime and Retrig are invalid.
C
M
Y
CM
MY
CY
CMY
K
Fame_DD-one_ Manual_003_150727.pdf 15 2015/8/7 12:00:47
