W-DMX G4 system
10
w i r e l e s s
s o l u t i o n
W-DMX
G4
MADE IN SWEDEN
RX
DATA
CTRL
RDM
LINK
TX
SIGNAL
G4
PWR
1
Fig.4
w i r e l e s s
s o l u t i o n
W-DMX
G4
MADE IN SWEDEN
RX
DATA
CTRL
RDM
LINK
TX
SIGNAL
G4
PWR
Fig.5
2 3
1.5 SWITCHING FLEX MODES
The FLEX mode determines if the unit is used in Transmit Mode (TX) or Receive Mode (RX).
To switch the FLEX mode, proceed as follows:
1. Disconnect the power cable.
2. Press and hold the function button on the front panel (1).
3. Reconnect the power cable.
4. Release the function button.
The mode is switched. The LEDs indicate the current mode: either TX (1) or RX (2):
