MuscleSquad Phase 3, Сборка и руководство пользователя

Страница: 17 / 28

16
ASSEMBLY INSTRUCTIONS
Step 7
1. Attach ring end of the L6950mm Weight Cable (#53) to one of the holes on the right side of the Left Cable Cross
Pulley Bracket (#20), secure with 1pc M8x20mm Hex Bolt (#46), 2pcs Ø 8mm Washers (#41) and 1pc M8 Aircraft Nut
(#47). (See above Cable Loops Diagram 3)
2. Draw the Cable downward and put 1pcs
Ø
50mm Pulley (#52) onto the Cable (#53), then put the Cable (#53) and
Pulley (#52) into the centre 2pcs of the left Bottom Connect Brackets (#18), align the holes then secure with 1pc
M10x75mm Hex Bolt(#9), 2pcs Ø 10mm Washers (#11), 2pcs 26mm Pulley Bushings (#51) and 1pc M10 Aircraft Nut
(#10).
3. Draw the Cable (#53) backward through the bottom gap of the ¢ 76mm Left Vertical support (#2). Put 1pc Ø 50mm
Pulley (#52) onto the Cable (#53) then put the Cable (#53) and Pulley (#52) into the centre of the 2pcs Left Bottom
Connect Brackets (#18) and Rear Left Stabiliser (#4), align the holes and secure with 1pc M10x75mm Hex Bolt(#9),
2pcs
Ø
10mm Washers (#11), 2pcs 26mm Pulley Bushings (#51) and 1pc M10 Aircraft Nut (#10).
4. Draw the Cable (#53) upward then put the Cable (#50) through the centre of two pulleys on the Double Floating
Pulley Bracket Assembly (#49) - (Which was hanging at Step 6).
5. Draw the Pulley downward, attach 1pc φ 90mm Pulley (#43) onto the Cable (353) then attach the Cable (#53) and
Pulley (#43) to the pulley bracket welding on the Rear Left Stabiliser (#4). Align the hole and secure with 1pc
M10x45mm Hex Bolt (#44), 2pcs φ 10mm Washers (#11) and 1pc M 10 Aircraft Nut (#10).
Key No Specifications QTY
9 M10x75mm Hex Bolt 4
10 M10 Aircraft Nut 12
11 φ 10mm Washer 24
41 Ø 8mm Washer 4
43 φ 90mm Pulley 4
44 M10x45mm Hex Bolt 8
46 M10x20mm Hex Bolt 2
47 M8 Aircraft Nut 2
49 Double Floating Pulley Bracket Assembly 2
51 26mm Pulley Bushing 8
52
Φ
50mm Pulley 4
53 L6950mm Weight Cable 2
69 12mm Bushing 4