MuscleSquad Phase 3, Сборка и руководство пользователя

Страница: 13 / 28

12
ASSEMBLY INSTRUCTIONS
Step 5
1. Attach one side of the 2600mm Zero Counterweight Cable (#45) to the bracket on the Squat Bar Connect
Bracket (# 77), align the holes and secure with 1pc M8x20mm Hex Bolt (#46), 2pcs Ø 8mm Washers (#41)
and 1pc M8 Aircraft Nut (#47).
2. Draw the Cable (#45) upward and put 1pc Ø 90mm Pulley (#43) underneath the cable then attach the
Cable (#45) and Pulley (#43) to the pulley bracket on front side of the Rear Left Upper Frame (#8), align the
holes and secure with 1pc M10*45mm Hex Bolt (#44), 2pcs φ 10mm Washers (#11) and 1pc M10 Aircraft
Nut (#10).
3. Draw the Cable (#45) backward and put 1pc
Ø
90mm Pulley (#43) inside of the Cable (#45), attach the
Cable (#45) and Pulley (#43) onto the pulley poster welding in the mid-section of Rear Left Upper Frame
(#8) then secure with 1pc M10x45mm Hex Bolt (#44) and 1pc
φ
10mm Washers (#11).
4. Draw the Cable frontward then put 1pc Ø 90mm Pulley (#43) underneath the cable then attach the Cable
(#45) and Pulley (#43) to the pulley bracket on rear side of the Rear Left Upper Frame (#8), align the holes
and secure with 1pc M10*45mm Hex Bolt (#44), 2pcs φ 10mm Washers (#11) and 1pc M10 Aircraft Nut
(#10).
5. Attach the Weight Rod (#42) to the end of the 2600mm Zero Counterweight Cable (#45).
Then slowly put the Cable (#45) and the Weight Rod (#42) into the ¢ 76mm Left Vertical support (#2).
6. Repeat above process to install right side 2600mm Zero Counterweight Cable (#45).