![MuscleSquad Phase 3 Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/musclesquad/phase-3/phase-3_assembly-and-user-manual_1858534011.webp)
10
ASSEMBLY INSTRUCTIONS
See above diagram.
Step 4
1. Please note the M16x60mm Hex Bolts (#37) were pre-assembled onto the Weight Stack Base Frame (#1)
and Weight Stack Upper Frame(#6).
2. Loosen the M16x60mm Hex Bolts (#37) on the Weight Stack Upper Frame (#6) to make sure the Weight
Stack Guide Rods (#31) can be put into the weight stack Bottom and Upper Frame (#6).
3. Screw the 2pcs Weight Stack Guide Rods (#31) to the right side with 2pcs M16x60mm Hex Bolts (#37) on
the Weight Stack Bottom Frame (#1), make sure not to over tighten so the Weight Stack Guide Rod can
move freely. Slide 1pc Rubber Bumper (#28) from the top of each Weight Stack Guide Rod (#25) to the
bottom. Slide 13pcs Weight Stack (#35) from top of 2pcs Weight Stack Guide Rods (#31) to bottom.
4. Slide the 1pc Weight Stem (#34) from the top of the Weight Stack Guide Rods (#31) onto the Weight
Stack (#35). Insert the Weights Select Rod (#32) into the centre hole of the Weight Stem (#34) and Weight
Stack (#35), align the holes and fix the Weight Stem (#34) to the Weights Stack Rod (#32) with Slip Pin (#33)
by using the hammer.
5. Tighten 2pcs M16x60mm Hex Bolts (#37) on the Weight Stack Upper Frame (#6) into the top holes of the
two Weight Stack Guide Rods (#31). Tighten the Bolts.
6. Repeat above process to install left side of the Weight Stacks Sets.
Содержание Phase 3
Страница 14: ...13 ASSEMBLY INSTRUCTIONS Cable Loop Diagram 2...
Страница 16: ...15 ASSEMBLY INSTRUCTIONS Cable Loop Diagram 3...