Instruction manual for devices of the MASI20 series
20
V 1.0
3.5.2 Screw connectors
As accessory
7
we also provide screw connectors.
The connection of the cables is identical for the detectors and actuators.
The acceptable section of wire goes from 0,14 to 1,5mm².
∅
0,14 - 1,5mm²
1
2
0,22Nm
Fig 3-7 :
wiring screw connectors
3.5.3 Protection inversion of connector
In order to avoid reversing the assembly of the connector on the module there exists a pin on the site of
the input connector. This prevents from connecting the output connector instead the input connector. To
be able to connect the input connector it is necessary beforehand to cut a pin of codification as explained
on the figure below.
F
AULT
Outputs
A
SI
P
WR
A
UX
P
WR
Inputs
Fig 3-8 :
Protection inversion of connector
7
Ref. 55 210
