MOUNTING DIMENSIONS
WARNING: Perform the mounting operation with power source off. The S1400 module was designed to be mounted within a
weatherproof enclosure. It is intended for mounting in a flat panel. First, cut a square mounting hole of 3-
5
/
8
in. (92 mm) x
3-
5
/
8
in. (92 mm). Insert the module from the front side of the panel and install the two mounting clamps one on each side of
the case,
(see mounting clamp detail). Secure the unit to the panel by tightening the clamps with a blade type screwdriver.
6 in.
(152 mm)
10-3/4 in.
(273 mm)
8-3/4 in.
(224 mm)
15 in. (381 mm)
Clearance for Conduit
3 in.
(76 mm)
9 in.
(229 mm)
SIDE VIEW
TOP VIEW
END VIEW
3/4 in. NPT
Conduit Holes
(2 places).
1/2 in. NPT
Conduit Hole.
4-1/2 in.
(114 mm)
1/2 in. NPT
Conduit Hole and Plug.
POWER SUPPLY BOX
3-1/2 in.
(89 mm)
3-3/4 in.
(95 mm)
3-3/4 in.
(95 mm)
4-3/8 in.
(111 mm)
4-5/8 in.
(117 mm)
3-3/4 in.
(95 mm)
BACK VIEW
SIDE VIEW
3-9/16 in.
(90 mm)
3-9/16 in.
(90 mm)
MOUNTING HOLE
6-3/4 in.
(171 mm)
Clearance for Plug
3-1/2 in.
(89 mm)
Mounting
Clamp
Mounting Panel
Use small
screwdriver to secure
the module in place
S1400 MODULE
Model S1400SP
only
MOUNTING
CLAMP DETAIL
Clamp locks
into bosses on
side of case
TERMINAL BLOCK (rail mount)
7 in.
(178 mm)
3-1/32 in.
(77 mm)
2-5/16 in.
(59 mm)
DIN Type
Mounting
Rail
*
Terminal Block
Mounting Bracket
To Panel
*
The terminal block has (2) two rail mount clamps for easy panel mounting. Mounting rail is NOT supplied.
Standard DIN mounting rail models: DIN 46277, EN50035, and EN50022 zinc–plated steel are recommended.
The recommended length for the mounting rail is 7 inches (178 mm) minimum.
Terminal
Block
2-5/8 in. (67 mm)
Clearance for
Mounting Rail
SIDE VIEW
FRONT VIEW
Terminal Block
Mounting Bracket
DIN Type
Mounting Rail
*
END VIEW
MOUNTING
BRACKET DETAIL
3
