00-02-0839 -
3
-
2012-09-21
Introduction
The PV25 diagnostic device is an economical, compact package with
advanced features. This J1939-compliant device provides parameter data,
displays active and stored fault messages, provides Tier4/Euro Stage IIIB
features, and tracks machine and engine hours.
The PV25 is equipped with two buttons to quickly access a convenient
menu, a graphic display, and two LEDs to indicate Active-fault Alarm or
Shutdown status in a sealed enclosure that matches the PowerView line of
displays
.
Basic Functions
Access all menus and functions of
the PV25 by using the
UP
and
DOWN
arrows on the front of the
gauge.
When power is first applied to the
PV25,
Parameter
readings begin
to display.
Wait to Start
- PV25 supports
‘Wait to Start’ - if the ECU
broadcasts a wait to start message,
the screen shows ‘Wait to Start’
and both LEDs light. Once the ECU
discontinues the message, the
signal becomes inactive, and the
message is replaced with
parameter readings.
DM13
- PV25 supports DM13. For
more information, see page 9
.
Up
Down
Either
Arrows in the Display field (beside the text information) indicate
available movement options – up, down, or either way.
1-800-548-1191 - http://www.partdeal.com - [email protected]
