Murphy HelmView 450, Руководство по установке

Страница: 6 / 24

Front Installation of Display
1. Place the back side of the display through the opening in the dash.
2. Use the 4 screws to line up the unit with the drilled holes.
3. Push the unit through the opening and the screws through the drilled holes until the
back of the case is flush.
4. Use the Nylock nuts provided to tighten unit to the dash. Use the appropriate wrench or
socket to tighten. Torque lock nuts to 8-10 inch pounds.
Back Installation of Display
1. Cut the dash to allow for the display. Ensure the materials are available to properly
secure the unit within the dash. Torque the 6-32 Nylock nuts to 5 inch pounds.
2. Place the display behind dash and line up the four mounting holes on the display with
the holes in dash.
3. Install four bolts and tighten nuts.
Gimbal Mounted Installation
If it is desired to gimbal mount the HV450, the gimbals can be sourced from Ram Mounting
Systems Inc. at
www.ram-mount.com
The RAM parts, drawings and models are accompanied by a ordering guide at
http://www.rammount.com/SupportCenter/GlossaryofTerms/tabid/149/Default.aspx
The HV450 has a matching bolt pattern for the RAM Diamond base with 9/16” ball
(P/N RAM-A-238).
Aesthetics
Murphy offers a set of plugs for the gimbal-mount application to cover the mounting holes
for aesthetic purposes:
•
Part # 78000814: Kit, Mounting, Plug, HV450
Section 78 00-02-0727
2015-04-16 - 2 -