Murex Tradestig 150-1, Руководство пользователя

Страница: 7 / 24

-- 7 --
bt29d2e
5.3.1 Recommended fuse sizes and minimum cable areas
Tradestig 150--1 Tradestig 200--1
Mains voltage 230 V
¦
10 %, 1--phase 230 V
¦
10 %, 1--fas
Mains frequency 50--60 Hz 50--60 Hz
Fuse (delayed--action)
85A 35% duty cycle MMA
120A 20% duty cycle MMA
150A 25% duty cycle MMA
10 A
16 A
20 A*)
10 A
16 A
20 A *)
Mains cable, area 3 x 2.5 mm
2
3 x 2,5 mm
2
Welding cable, area MMA 16 mm
2
16 mm
2
Welding cable, area TIG 16 mm
2
25 mm
2
*) NOTE! The mains plug is approved for maximum 16A.
6 OPERATION
General safety regulations for the handling of the equipment can be found on
page 3 . Read through before you start using the equipment!
6.1 Connections and control devices
Make sure that the welding power source is connected to the correct supply voltage
and that it is protected by the correct fuse rating.
1. Mains switch
2. Mains cable
3. Connection for gas from gas bottle
4. Connection for the TIG torch switch
5. Connection for gas to the TIG torch
6. TIG torch connection (--)
7. MMA: return cable connection (--)
8. TIG: return cable connection (+)
MMA: welding cable connection (+)
9. Control panel (see 6.2)
Note! 7 and 8 are used for welding
current supply and return cable
connection during MMA welding
GB