Murex Tradesarc 200, Инструкция по эксплуатации

Страница: 14 / 28

-- 14 --
bh37d2em
11.2 Symbol and Function explanations
TIG welding
TIG welding melts the metal of the workpiece, using an arc struck from a tungsten elec-
trode, which does not melt itself. The weld pool and the electrode are protected by
shielding gas.
”LiveTig start”
With “LiveTig start” the arc strikes when the tungsten electrode is brought into
contact with the workpiece and then lifted away from it.
Active panel
Settings are made from the control panel.
Remote control unit
Settings are made from the remote control unit.
The remote control unit must be connected to the remote control unit socket on the
machine before activation. When the remote control unit is activated the panel is
inactive.
12 WELDING DATA MEMORY
Two different welding data programs can be stored in the control panel memory.
Press button or for 5 seconds to store the welding data in the
memory. The welding data is stored when the green indicator lamp starts to flash.
To switch between the different welding data memories press button or
.
The welding data memory has a back--up so that the settings remain even if the
machine has been switched off.