Murex Tradesarc 200, Инструкция по эксплуатации

Страница: 7 / 28

-- 7 --
bh37d1em
6 OPERATION
6.1 PFC -- Power factor correction
The Tradesarc 200 is 230 V single--phase power sources equipped with a PFC cir-
cuit making it possible to use the full range of the machine on a 16 A fuse. The PFC
also protects the machines against fluctuating mains voltage and makes it safer to
use with a generator. Tradesarc 200 can operate with extra long mains cables, over
100 m, giving you a very larger working radius.
6.2 Connections and control devices
1 Connection (+)
MMA: for return cable or welding cable
TIG: for return cable
4 Connection (--)
MMA: for return cable or welding cable
TIG: for Tig torch l
2 Connection for remote control unit 5 Toggle switch for mains power supply 0 / 1
3 Control panel, see under 3.2 6 Mains cable
6.3 Connection of welding and return cable
The power source has two outputs, a positive terminal (+) and a negative terminal
(--), for connecting welding and return cables. The output to which the welding cable
is connected depends on the type of electrode used. The connecting polarity is
stated on the electrode packaging. Connect the welding cable to the terminal stated
on the electrode packaging.
Connect the return cable to the other output on the power source. Secure the return
cable’s contact clamp to the work piece and ensure that there is good contact
between the work piece and the output for the return cable on the power source.
6.4 Overheating protection
The welding power source has a thermal overload trip which operates if the
temperature becomes too high, interrupting the welding current and lighting a yellow
indicating lamp on the front of the power source. The thermal overload trip resets
automatically when the temperature has fallen.
GB