Murex Tradesarc 150, Инструкция по эксплуатации

Страница: 9 / 24

-- 9 --
bh33d1me
TIG welding is particularly useful where high quality is demanded and for welding
thin plate. Tradesarc 150 also has good characteristics for TIG welding.
In order to TIG weld, Tradesarc 150 must be equipped with:
S
a TIG torch with gas valve
S
a welding gas cylinder (a suitable welding gas)
S
a welding gas regulator (suitable gas regulator)
S
tungsten electrode
S
suitable auxiliary material, if necessary.
TIG scrape start
To scrape start lightly scrape the tungsten
electrode against the workpiece to create an arc.
7 MAINTENANCE
Regular maintenance is important for safe, reliable operation.
CAUTION!
All guarantee undertakings from the supplier cease to apply if the customer himself
attempts any work in the product during the guarantee period in order to rectify any faults.
WARNING!
The mains supply must be disconnected before cleaning!
7.1 Power source
Check regularly that the welding power source is not clogged with dirt.
How often and which cleaning methods apply depend on:
S
the welding process
S
arc times
S
placement
S
the surrounding environment.
It is normally sufficient to blow down the power source with dry compressed air
(reduced pressure) once a year.
Clogged or blocked air inlets and outlets otherwise result in overheating.
7.2 Welding torch
The welding torch’s wear parts should be cleaned and replaced at regular intervals in
order to achieve trouble--free welding.
GB