Murex Tradesarc 150, Инструкция по эксплуатации

Страница: 5 / 24

-- 5 --
bh33d1me
3 INTRODUCTION
Tradesarc 150 is a welding current power source intended for use with coated
electrodes (MMA welding) and TIG welding.
Tradesarc 150 is supplied with 3 m of mains cable and an instruction manual.
Accessories for the product can be found on page 21 .
4 TECHNICAL DATA
Tradesarc 150
Mains voltage 230 V, 1
μ
50/60 Hz
Primary current
I
max
22 A
Mains supply Z
max
0.35 ohm
No--load power 30 W
Voltage/current range 8 A /20 V -- 150 A /26 V
Permissible load
25% duty cycle
60% duty cycle
100% duty cycle
150 A / 26.0 V
100 A / 24.0 V
90 A / 23.6 V
Power factor at maximum current 0.99
Efficiency at maximum current 80%
Open--circuit voltage 58 -- 72 V
Operating temperature --10 ˚ C -- +40 ˚ C
Transportation temperature --20 ˚ C -- +55 ˚ C
Constant sound pressure at no load < 70 dB
Dimensions, l x b x h 418 x 188 x 208 mm
Weight 7.9
Enclosure class IP 23
Application class
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading. The duty cycle is valid for 40 ˚ C.
The duty cycle is valid for 40
˚
C.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
Mains supply, Z
max
Maximum permissible line impedance of the network in accordance with IEC 61000--3--11.
GB