I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
CONTEMPORARY WATER COOLERS
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
Supply Connections (Continued)
M-OBR4-GRC
Page 9 of 16
New: 12
/19/17
7020-963-001
MURDOCK MFG. •
15125 Proctor Avenue • City of Industry, CA 91746 USA
Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com
Member of
OUTDOOR BOTTLE FILLERS
3
Connect one of the Multiple Water Supply Connections to the 1/4" NCT x 1/4" OD
Push-In Y-Strainer located within the Drinking Fountain. To increase or decrease
flow, use slotted screwdriver. Re-install Access Panel with screws.
4
Connect the last Multiple Water Supply Connection to the 1/4" OD Tube x
1/4" NPT Male Fitting. (Note: An adapter is required to connect the Main
Water Supply Line to the 1/4" Male NPT Fitting). Connect the blue 1/4" OD
Tube to Bottle Filler Spout.
Ø
3
16
" Hole
Slotted
Screwdriver
Decrease
Flow
Increase
Flow
3
4
2
1
6
5
4
Water Supply Tubing
3/8" OD x 1/4" Female NPT Adapter
1
2
1/4" OD x 1/4" NPT Male Fitting
3
Bottle Filler Spout
4
1/4" OD Blue Tube
5
3
1
4
5
2
(For Reference Only)
1/4" NCT x 1/4" OD
Drinking Fountain
Drinking Fountain Bubbler
1
2
3
Pushbutton
Bottom Access Panel
4
5
Access Panel Scews
6
Push-In Y-Strainer
