A181CUSP SERIES FULLY RECESSED ADA FOUNTAIN & CUSPIDOR
NOTICE
A dielectric coupling must be used to connect the drinking fountains to the water supply . A nonmetallic
coupler is furnished with this drinking fountain to meet this requirement.
ROUGHING-IN AND DIMENSIONAL DRAWING
Prior to roughing consult with local, state, and federal codes for proper mounting height.
NOTES:
Dimensions indicated are for ADA frontal approach installation. For Child ADA-ABA compliant parallel
approach installation, decrease height of installation for spout to be 30” maximum above finished floor.
Provide clear floor space as required. Adjust vertical dimensions as required to comply with federal,
state, and local codes.
Adjust vertical dimensions as required to comply with federal, state, and local codes.
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
CONTEMPORARY WATER COOLERS
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
DRINKING FOUNTAINS
A181-CUSP
Page 2 of 9
02/26/16
7020-003-001
MURDOCK MFG. •
15125 Proctor Avenue • City of Industry, CA 91746 USA
Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com
Member of
1-1/4" OD SLIP
JOINT WASTE
CONNECTION
GENERAL NOTES:
1. ALL DIMENSIONS ARE IN INCHES.
*2. DIMENSIONS SHOWN ARE FOR RECOMMENDED ADULT HEIGHT. ADJUST VERTICAL
DIMENSIONS AS NECESSARY TO COMPLY WITH FEDERAL, STATE & LOCAL CODES.
3. STOP VALVE NOT PROVIDED.
17"
WALL
OPENING
12"
WALL
OPENING
22" - 40"
1
3
8
"
6"
25
3
8
"
2"
6"
(4) Ø
1
8
" MTG
HOLES
ACCESS
PANEL
72" MIN
WALL
OPENING
*33"
30"
WALL
OPENING
9
1
2
"
27"
WALL
OPENING
15" MIN
15" MIN
17" MIN
1
3
8
"
30
3
4
"
