Page 10 of 13
A171.8
Revised:
09/07/18
MURDOCK MFG. •
15125 Proctor Avenue • City of Industry, CA 91746 USA
Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com
Member of
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
CONTEMPORARY WATER COOLERS
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
WATER COOLERS
7020-904-001
CARTRIDGE REPLACEMENT/ STRAINER MAINTENANCE
2. Clean Strainer as needed using clean water.
3. Cartridge Replacement - insert diamond end of the Universal Tool into Pushbutton, rotate 90
degrees and pull firmly to remove the Button. Remove Cartridge Retaining Nut . Remove and
replace Cartridge. When replacing Cartridge, be sure to align the inlet and outlet Ports on the
Cartridge with the Ports in the Valve Body.
Note: Use the Universal Maintenance Tool to perform the following:
—
NOTE: STRAINER SCREEN MUST BE IN PLACE FOR WATER TO FLOW.
1. Strainer Plug must be removed before Cartridge replacement and Strainer
maintenance (no need to turn the water off at the Angle Stop). Some residual water will drain
during Plug removal.
2
4
3
1
5
ITEM
PART NUMBER
DESCRIPTION
5
7003-830-000
UNIVERSAL MAINTENANCE TOOL
4
7003-864-000
STRAINER FILTER SCREEN
3
7003-097-001
O-RING &STRAINER PLUG
2
7000-060-000
FLOW REGULATOR CARTRIDGE (0.5 GPM)
1
7003-095-001
VALVE ASSEMBLY
