39
PrOgrAM
—
formerly known as “Mode Memory”
Pre-requisites
This job shop instructs you in setting up 1:2 duplexing and finishing job parameters;
and then putting these specific job parameters into memory after naming the job .
You will not need any samples for this job .
APPLICATIONS
The PROGRAM functionality allows a “one touch” key to be programmed for frequently
used job parameters . These “one touch” keys can then be given “job names” for easy
future access . This feature promotes a “user friendly office environment” for the end-
users . Up to 30 job programs can be stored .
Salespeople often refer to this feature as “demo in a box” because it increases the ease
of operation during a selling demonstration . Rather than taking a potential client through
the multiple steps required to complete a job, saving these steps into a PROGRAM
and naming the job (e .g ., booklet, page insert), demonstrates “ease of use” for the client .
Steps/Keystrokes:
If not on the
Home
screen touch the
Menu
key on the
Control Panel
.
Touch the
Copy
icon .
If already on the
Copy
screen press the
“reset”
Key before beginning this job shop .
Setting up the job parameters
1 . Touch
duplex/Combine
.
2 . Touch
1-sided > 2-sided
.
3 . Touch
OK
.