SyChip/Murata Confidential Page 30 of 31 SN2100 Datasheet Ver. 1.1
ii) Please pay attention to minimize any mechanical vibration or shock, not to
drop the product or a substrate that contains the product during
transportation.
iii) Since the application of static electricity or overvoltage may cause a
defect in the product or deterioration of its reliability, caution must be
taken against exposure to any static electricity generated by electrified
items such as work benches, soldering irons, tools, carrying containers,
etc.
iv) Caution shall be taken to avoid overstress to the product during and after
the soldering process.
v) Since the applied soldering method may deteriorate the reliability,
thorough evaluation is recommended.
vi) In case the product is to be used in equipment or electric circuit that
requires high safety or reliability function or performance, sufficient
reliability evaluation checks for safety shall be performed before
commercial shipment and moreover, due consideration to install a
protective circuit is strongly recommended at customer's design stage.
Please provide an appropriate fail-safe function on your product to prevent
any damages that may be caused by the abnormal function or the failure
of our product.
Notwithstanding the foregoing, the product shall not be used in any application listed below
which requires especially high reliability for the prevention of such defect as may directly
cause damage to the third party's life, body or property.
- Aircraft equipment
- Aerospace equipment
- Undersea equipment
- Power plant control equipment
- Medical equipment
- Transportation equipment (vehicles, trains, ships, etc.)
- Traffic signal equipment
- Disaster prevention / crime prevention equipment
- Application of similar complexity and/or reliability requirements to the applications listed in
the above.
3.
SyChip’s warranty as provided in Clause 1 above that the products comply with
descriptions expressly specified in the specifications shall be effective for a period of six (6)
months from the date of delivery. SyChip shall not be liable for any defects that occur in
dry packed products that are installed more than six (6) months after shipment.
SyChip’s liability under this warranty shall be limited to products that are returned during
the warranty period to the address designated by SyChip and that are determined by
SyChip not to conform to such warranty. If SyChip elects to repair or replace such
products, SyChip shall have reasonable time to repair such products or provide
