Murata MEMS Evaluation
Unit User Manual
Murata Electronics Oy
Subject to changes
6/34
www.murata.com
Doc.Nr. 82175700
Rev.D
4
Installation
The demo GUI uses Java programming language, so the Java Runtime Engine (JRE) must be
installed. To install the GUI, just copy the Murata MEMS demo folder from the removable drive to a
suitable directory in your hard drive (for example C:\Murata MEMS demo). If the demo GUI was
distributed as a ZIP package, create a folder and extract all files and folders to this new folder.
To create a shortcut for the GUI on the Windows desktop, right-click the start.bat file and select
Send to -> Desktop (create shortcut). The Murata MEMS demo folder also contains an icon for the
shortcut (AppIcon.ico). This can be set for the shortcut by right-clicking the created shortcut on the
desktop and selecting Properties -> Change Icon and then browsing to the Murata MEMS demo
folder and selecting the AppIcon.ico file.
Note: Do not use any special characters in the GUI installation path.
Note: Linux users must execute install.sh script after installing the FTDI drivers and
connecting the demo board to the PC. This will configure the access permission for the
FTDI USB devices using the UDEV module (this was tested using Ubuntu 12.04 LTS).
Note: If the demo GUI was distributed as a ZIP package, the user must also change file
permissions in Linux to be able to execute .sh script files since the ZIP archive does not
store file permissions. This can be done using the command: chmod +x start.sh.
