Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2018
Type 1SC EVK User Guide, v1.3, 5/4/2020
Page
7
of
44
www.murata.com
2
DESCRIPTION
The EVK is an evaluation and application development kit for the Murata Type1SC and Type1WG
LTE modules. It includes an Evaluation Board (EVB) with an Arduino shield interface which allows
the EVB to be used across various Arduino based MCU development platforms such as the STM32
Nucleo-64 boards.
Some major components of the EVB are listed and shown below.
•
Type1SC (or Type1WG) module
•
2 mini-USB ports
•
LTE/GNSS antenna
•
1 micro SIM slot
•
3 LEDs
•
4 buttons
•
SMA connector for RF testing
•
Pads for accessing Murata LTE module IO pins
o
Arduino headers supporting 3.3V/5V IOs for UART modem control interface
o
Expansion headers for access to the module pins
o
Jumpers CN11 to facilitate current measurements
Figure 3 Murata LTE module evaluation board (top view)
Murata LTE module
SMA
CN11
uSIM
socket
Antenna
USB/UARTs
