Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2018
Type 1SC EVK User Guide, v1.3, 5/4/2020
Page
15
of
44
www.murata.com
7
STARTUP PROCEDURE
Unpack the EVK package and use the following steps to setup the reference PC environment and
configure the EVK. The ensuing discussions are based on a PC running Windows 10 Pro.
Do not connect to the Arduino interface.
7.1 Install PuTTY
Download and install PuTTY for Windows from
. This is the recommended
serial port console for PC serial communication with the module.
7.2 Connection to PC
Connect two USB cables from a PC to the two mini-USB ports labeled CN13 and CN14. The driver
should be automatically installed for the two UART ports (A & C) associated with CN13.
Figure 11 EVK setup
The driver for UART B associated with CN14 needs to be installed manually.
•
https://www.silabs.com/products/development-
tools/software/usb-to-uart-bridge-vcp-drivers
•
Download the latest version of universal driver for Windows 10.
•
Unzip the downloaded zip file, and run CP210xVCPInstaller_x64.exe to install the driver.
After the above steps, there should be three COM ports shown in Device Manager -- one for Debug
(e.g. COM8, 921600 baud), one for CLI (e.g. COM9, 115200 baud), and one for AT (COM13, 115200
baud). See below an example screenshot of the Device Manager.
