© Munters AB, 2018
31
# = Sign separates between every house number
6.3.2
A
DVANCED TEXT FUNCTIONS
The following sections detail the advanced Text functions.
•
Defining who can text Communicator
•
6.3.2.1
Defining who can text Communicator
1. Select
SYSTEM > Advanced Setup > GSM/CDMA
.
This menu defines which cell phones can send messages to the Communicator via text.
2. In the
Text From
field, choose:
o
Addr. Book (only those addresses which are text enabled) or
o
Any (enables sending text via any cell phone).
NOTE:
Acknowledgement messages are only sent when Addr. Book is selected.
6.3.2.2
Configuring an SMS ringtone
If desired, a ringtone can play when an SMS message from Communicator arrives, thereby alerting you
of an upcoming message.
1. Select
SYSTEM > Advanced Setup > GSM/CDMA
.
2. In the Text Precall field, select Yes.
3. In the Precall time, enter the time (in seconds). This parameter ensures that there is sufficient time
for the phone to ring before the SMS tone plays.
6.3.3
T
EXT MESSAGE RESPONSES
2.0
Event codes, page 42 lists the events corresponding to the codes sent in a text message.
•
Resetting the siren, page 31
•
Resetting the alarm, page 32
•
Acknowledging a message, page 32
6.3.3.1
Resetting the siren
NOTE:
After typing the text message, press the 'Send' button to send it to the Communicator.
In the procedures below, the
highlighted text
shows the SMS text to be sent.
•
Resetting the Siren of One House
CELLULAR MODEM
TEXT FROM
Addr. Book
TEXT PRECALL
Yes/No
PRECALL TIME
5
Auto Answer
2
Operator
STD
