Munters Rotem Communicator, Руководство по эксплуатации и техническому обслуживанию, Страница: 32 / 64

© Munters AB, 2018 32
!RX
> 'Send SMS' to the Communicator cell phone number.
! = Start of message
R = Reset
X = Represents house number (can be any positive number from 1-64)
•
Resetting the Siren of Several Houses
!RX#X#X
> 'Send SMS' to the Communicator cell phone number
! = Start of message
R = Reset
X = Represents house number (can be any positive number from 1-64)
# = Sign separates between every house number
•
Resetting the Siren for All Houses
!RALL
> 'Send' to the Communicator cell phone number
! = Start of message
R = Reset
ALL = Can be typed both in capital letters or small letters.
6.3.3.2 Resetting the alarm
To reset all the alarms, send the following text message:
!C
> 'Send' to the Communicator cell phone number
! = Start of message
C = Communicator
6.3.3.3 Acknowledging a message
If Message Repeat is enabled (refer to page 43), Communicator continues to send alarms until an
acknowledgement is sent.
•
Requesting a Response for Every Sent Text Message
!AON
> 'Send' to the Communicator cell phone number
! = Start of message
A = Acknowledgement
•
Canceling a Response for Every Sent Text Message
!AOFF
> 'Send' to the Communicator cell phone number
! = Start of message
A = Acknowledgement.
6.4 Common Functions
The following sections detail the technician tools.
•
Select SYSTEM > Technician Tools.
TECHNICAL TOOLS
TEST 4
HYPER TERMINAL YES
MONITOR 2