© Munters Corporation , July 2018
16
QM1115r0
Cabling
Chapter 3
Step 13
Put a Nylon Guide Link [C] (black) on each Screw Hook [B] that is directly above the center of each inlet.
Attach one Lift Line [E] to Main Cable using (1) Cable Clamp [D]. Lift line should be attached 14” back
from hook toward the winch end. Run each lift line through the adjacent Nylon Guide Link [C] and attach
Azuma Bolt and Nut [A].
See Figure 13A and 13B.
Cable Clamp [D]
Azuma Bolt & Nut [A]
Lift Line [E]
Eye Screw [B]
Nylon Guide Link [C]
Figure 13A
Note:
If optional kit, Lift Package (FA1500) was purchased, hardware mentioned below in
Step 13
is included. If
not purchased, hardware provided by others.
