Munters MK30D, Руководство пользователя

Страница: 4 / 36

Dehumidi fi er MKD-series
1 Introduction
1.1 General
The Munters MKD-series dehumidi fi
ers are available in four (4) different sizes and they can easily be moved
to locations where dehumidi fi cation of air is required.
WARNING!
It is the responsibility of the operator to read and understand this service manual and other information provided,
and to use the correct operating procedures.
Read the entire manual before the initial start-up of the dehumidi fi er. Awareness of the correct operating
procedure for the machine and its safety devices is important, to avoid damage or injury.
1.2 Unpacking of the units MK30D-MK60D
WARNING!
If the dehumidifier has been laid down during transport, it is imperative that you place it in upright position for at
least 1 hour before put into service!
Follow these steps to unwrap the unit and make it ready for use
1 Open the cardboard box in the top
2 Tilt the box with the handle and wheels towards the
fl oor
3 Pull the handle of the dehumidi fi er and wheel the dehumidi fi er out of the box still lying down
4 Tilt the dehumidi fi er to an upright position
5 Loosen the knobs, pull the handle up to the desired height and retighten the knobs
6 Remove the protective foil on the control panel
1.3 Unpacking of the unit (MK90D)
WARNING!
If the dehumidifier has been laid down during transport, it is imperative that you place it in upright position for at
least 1 hour before put into service!
1 Unwrap and lift the box from the dehumidi fi er
2 Lift the dehumidi fi er clear of the pallet
3 Connect the drain outlet stub which is supplied with the dehumidi fi er
1 Introduction
190TEN-1071-C1304