Munters Farm P-XL, Руководство пользователя

Страница: 34 / 134

© Munters AB, 2015 34
2. In Device > Vent & Curtain Levels , define the opening levels for each curtain .
3. In Static Pressure > Tunnel Ventilation , define the target pressure.
3.7 Control Mode
Select house-operating modes, turn temperature curves on or off and select which type of min/max level
method to use.
•
House Mode: Select whether the house is in one of the brood set ups, or in full house.
•
Empty House Mode: Select YES to disable alarms.
•
Temperature Curve: If you select OFF, temperature settings become fixed values until midnight
on the next setting in
Control | Temperature Curve (page 15).
•
Min. Max. Level Control: Set ventilation control method (By Days, By Days Curve, By Time, By
Soft Min, and Weight). Refer to Min/Max Level, page 26 for more details)
•
Heat Cycle: Enable cycle heaters. Refer to Cycle Heaters | Set Definitions, page 18.
•
Analog Heat Mode: Define the variable heating mode (Linear, Proportional, Linear Valve).
Refer to Variable Heater Help | Set Definitions, page Error! Bookmark not defined.
3.8 System Parameters
System Parameters consolidates all of the HELP | SET menus into one scroll screen.
Page System Parameter
16 Temperature Curve
Error!
Book
mark
not
define
d.
Cycle Heater
17 Radiant Heater
19 Variable Heater
24 Humidity Treatment
26 CO2 Treatment
33 Static Pressure
39 Ventilation Levels
42 Curtains
CONTROL MODE
House Mode
Empty House Mode

Temperature Curve

Min. Max. Level Control

Heat Cycle
Analog Heat Mode
FULL
HOUSE
HOUSE
BY WEIGHT
NO
LINEAR