Munters Element, Руководство по эксплуатации и техническому обслуживанию

Страница: 41 / 83

© Munters AB, 2018 41
•
Temperature (C/F)
•
Pressure (Pascal/IN.W.C)
•
Weight (Kg/Lb.)
•
Length (Meter/Feet)
• Volume (M3/h or CFM)
o
Network ID:
o
Baud rate: Baud rate defines the communication rate between Element and any
communication device (for example, the Comm-Box) or between Element and the
Expansion units. Choose one of the following:
•
4800
•
9600 (default)
•
19200
•
38400
•
57600
•
115200
 Since faster rates and longer transmission distance mean a greater chance of
transmission errors, reduce the baud rate as you increase the distance.
 In any case where there are transmission errors, reduce the baud rate.
 Elements, Communicator, and RLINKs (if used) must have the same baud
rate!
 Incorrect definitions can result in alarms for missing controllers and
communication from unidentified controllers.
7.2 Defining the Group Settings
Group settings define the parameters relevant to a herd.
NOTE Define these parameters at the beginning of a growth cycle.
1. Go to Management > Group Settings.
2. Define the following parameters:
o
Current Growth Day: Enter the current growth day. It is possible to enter negative
growth days (up to -2). If you reset the growth day for a new group using this tool,
your old history data does not clear. Use the New Group function to clear out old
history in preparation for new animals.
o
Number of Animals: Enter the number of pigs in the group.
o
New Group: Use the new group function on arrival of a new set of animals to set the
growth day back to 1, 0, -1, or -2.