Wire Winder Operator’s Manual
Page No: 3
Operational and Maintenance Manual
Introduction
This manual has been written to assist the operator/owner with training,
operating, servicing and preventive maintenance of the Munro Wire Winder.
All safety and maintenance procedures should be followed to prevent
operator injuries and damage to the Wire Winder.
Please read thoroughly and familiarize with all points in this manual before
operating.
Safety
Please read and familiarize yourself with the following safety points before
operating the Wire Winder.
•
Always use caution and care when operating, check all clearances
before
engaging winder.
•
When operating the Wire Winder ensure spool top and brace are
installed and that the main shaft wedge and retaining pin are
installed securely.
•
Do not
over fill the spool.
•
Ensure that the Wire Winder is in good working order. Do not
operate if equipment is damaged or defective.
•
Do not allow any person/s to approach the Wire Winder or wire/s
connected to the Wire Winder when it is being operated.
•
Do not dismount from vehicle while Wire Winder is operating.
•
Ensure that maintenance is carried out regularly as listed in this
manual.
•
It is recommended that the operator wear safety clothing/equipment
when practical.
Warranty
A 12-month warranty covers that the equipment manufactured shall be free
from defects in workmanship and materials when the Wire Winder has been
properly operated, maintained and used under normal conditions. The
warranty period shall commence when the Wire Winder is shipped from Munro
Engineers.
The warranty shall not cover ordinary wear and tear of the equipment and any
modifications the owner has carried out.
Munro Engineers makes no warranty of any kind whatsoever with respect to
Parts manufactured or supplied by other persons; however Munro Engineers
shall assist the buyer in connection with warranties provided by others.
