9
CHECKING THE GAS FLOW
To check the Gas Flow into the Workstation the following equipment is required:
1. Gas Flow Meter
(0 – 50 Litres per minute)
2. Pressure Gauge
(0 – 3 Bar)
Connect up the equipment as shown and lift lid as shown.
e.g.: Gas flow required = 35 L / minute
Pressure Gauge Reading shows 2 Bar
Flow Meter Reading = 35
35
=
= 20.2 L/M
1 + 2
1.73
1
Any adjustment to the gas flow should be made using the flow regulator situated behind the back
cover.
Gas Flow = Flow Meter Reading
1 + Pressure Gauge Reading
1
Flow Meter
Pressure Gauge
Pressure Regulator (output set @ 15 PSI)
Inlet Solenoid
Gas Out
Gas In
Flow Regulator
