19
EN
• Use of ladders with defective components
• Inadequately qualified or insufficient assembly and operating personnel
• Unauthorised structural modifications
• Catastrophes caused by external influences or force majeure
It is the sole responsibility of the operator to ensure that the safety conditi-
ons are complied with and intended use is ensured.
MUNK
GmbH
Günzburg,
21.03.22
Conversions and modifications
In compliance with the legal requirements of the Ordinance on Safety and
Health (BetrSichV), persons with sufficient technical knowledge and skills
can carry out minor repair work on ladders and steps.
Major repair work should be carried out by authorised specialist companies
or the manufacturer.
Copyright
These instructions apply to all ladders whose material numbers are listed on
the title page.
©2022 MUNK GmbH
All rights to this document are reserved by MUNK GmbH. This document
may not be copied, reproduced or translated in whole or in part without the
written permission of MUNK GmbH.
The document is intended for the user of the product described and may
only be passed on to the purchaser if the ladder is resold.
Subject to technical modifications and errors. No claims to specific pro-
perties of the product can be derived from the contents of these operating
instructions.
Inteded use
The listed ladders of MUNK GmbH comply with the series of standards
DIN EN 131.
Only use the ladder under the conditions described in these operating inst-
ructions. Any other use is considered improper.
