INSTALLATION MANUAL
Confirm the minimum drain tilt is 1/100 or more
NOTE
1.3.4 Steel roof beam structure
Install and use directly the supporting angle steel.
Hanging screw bolt
Supporting
angle steel
Hanging bolts
1.3.1 Wooden construction
1.3.2 New concrete bricks
1.3.3 For Original concrete bricks
Put the square timber traversely over the roof beam, then install the hanging
screw bolts.
Inlaying or embedding the screw bolts.
Use embedding screw bold, crock and stick harness.
Timber over the beam
Roof beam
Ceiling
Hanging screw bolts
(Blade shape insertion)
(Slide insertion)
Steel bar
Embedding screw bolt
(Pipe hanging and embedding screw bolt)
Install the hanging hook with expansible bolt into the concrete
deep to 45~50mm to prevent loose.
2 Overhanging the indoor unit
3. Ceiling Installation
4. Wall Mounting Installation
- Locate the hanging arm on the hanging screw bolt.
Screw nut
Shockproof cushion
Hanging arm
Hanging
screw bolt
Washer
- Remove the side board and the grille.
Hanging
screw bolt
Hanging arm
Grille
Side board
2
0
2
5
m
m
>
2
0
m
m
Downward declicity lower between (1/100)
Connecting point of
refrigerant pipe(gas side)
Connecting point of
refrigerant pipe(Liquid side)
Drain point
8
