Version 1.04
IMC08 Banknote Counter & Sorter User Manual
Page 26 of 47
Version 1.04
IMC08 Banknote Counter & Sorter User Manual
Page 27 of 47
The batch number will be increased by 10 by pressing the ← key, or decreased by 10 by pressing the key → until it
becomes 0. And it will be increased by 1 by pressing the ↑ key, or decreased by pressing the ↓ key.
Press the ESC key to return to the main interface to confirm the batch quantity.
Figure 5-20 Batch Setting Interface
Figure 5-21 Batch Setting Interface
Note: the stacker maximum capacity is 200 bills, so the batch number should be less or equal to 200.
Batch function is used to select a batch quantity for a specific counting process. The IMC08 counts a preset
number of notes and then stops counting when the batch number has been reached, even if the notes remain
in the hopper. When the banknotes are removed from the stacker, the IMC08 will continue count up to the
preset batch quantity to create another batch.
Figure 5-22 Batch Number Indicator
5.7. Check Detail of Counting
In the MDC, SDC or SDCV mode, press the REC key upon the completion of counting to enter the interface
shown in the following figure to check the details of counting.
Figure 5-23 IMC08 Speed Indicator
5.6. Counting Speed Setting
There are four counting speed options: 1500, 1200, 1000 and 800 (Note: 1500 and 1200 are the only optional
in CNT mode). The default speed is 1000 in three modes. If a specific setting is needed, different counting
speed can be switched by pressing the SPEED key in any counting mode.
