Version 1.04
IMC08 Banknote Counter & Sorter User Manual
Page 18 of 47
Version 1.04
IMC08 Banknote Counter & Sorter User Manual
Page 19 of 47
5.3.3. Non-Volatile Memory for Currency Mode
The currency mode setting is non-volatile. For example, if you set multi-currency counting mode before you power
down the IMC08, next time the IMC08 will be in multi-currency counting mode after power on. It is a convenience
that you will not need to reselect the currency every time you power on the IMC08.
5.4. Counting Mode Selection
After the machine is turned on, the flag & currency graphic appears in the upper left corner, indicating that the
machine is in the current currency counting mode.
The default mode is MDC mode. By pressing the MODE key of the control panel, three counting modes can be
toggled in an MDC-CNT-SDC-SDCV sequence.
Note: Only MDC mode is effective in the Multi-currency mode.
Example: Put a handful of banknotes (including USD, EUR, GBP) into the IMC08 hopper to count. The interface of
the IMC08 displays as the following figure at the end of counting.
Figure 5-10 Multi-currency Counting Mode
5.3.2. MULT (Multi-Currency Mode)
Multi-Currency Mix Counting: Banknotes of multiple currencies are mixed together and put into the IMC08
to count. The IMC08 can recognize any of the first 3 currencies displayed on the currency selection interface.
Figure 5-11 Multi-currency MDC Counting Result
Figure 5-9 EUR Counting Result
Take out the USD in the stacker, and then put a EUR banknote into the machine to count. The display screen
is showed as Figure 5-9.
