Page 23
Page 24
IMC01 Banknote Counter User Manual Version 1.09
IMC01 Banknote Counter User Manual Version 1.09
5.1.4.1 KEY BEEP
Move the cursor to the KEY BEEP option, press the MENU button to turn on or
off the key beep.
To enter the Function Setting interface by press the key, as shown in the
following figure.
Use the cursor to select with sub-menu you want to turn on/off, and press
MENU button to confirm, and press ESC button to quit.
As shown in Figure 5-4, the sensors values are only for engineer to check
whether any sensor has a malfunction. If you meet any problem about use,
please take a photo of this page and contact us.
If you meet cases about banknote detection errors, please try to calibrate the
CIS. The CIS calibration steps are shown in Figure 5-5. For more detail instruc-
tion, we recommend you to see the maintenance manual or watch the video:
https://bit.ly/2C17fom.
5.1.1 Read Sensor Values
5.1.2 CIS Calibration
5.1.3 MG/MT Waveforms
5.1.4 Function Setting
Figure 5-4 Sensor Values
Figure 5-5 CIS Calibration Steps
Figure 5-6 MG/MT Waveforms
Figure 5-7 MG/MT Waveforms
