Page 15
Page 16
4.3.4 Accumulation
4.3.5 Face Function
4.3.6 Orient Function
The batch number will be increased by 10 by pressing the key , or decreased
by 10 by pressing the key until it becomes 0. And it will be increased by 1 by
pressing the key , or decreased by pressing the key .
Press to enable the accumulation function.
In any counting mode, the accumulation function of the number of the banknotes
can be enabled by pressing the key .
This function is available by pressing the FACE key in SDC mode until “FACE” is
displayed on the main screen.
It allows the user to sort the banknotes based on whether they are loaded into the
hopper face up or face down. This first note in the hopper determines the sorting
and counting orientation. If the first note through the machine is face up, all notes
in the hopper that are face up will end up in the stacker, and the other notes will end
up in the reject pocket. Total number and value will be displayed on the main
screen.
This function is available by pressing the ORI key in SDC mode until “ORI” is
displayed on the main screen. This function allows the user to count and sort the
notes by one of 4 orientations. The fist note in the hopper determines the counting
orientation. Any time a note passes through the machine and does not conform to
the orientation determined by the first note, the machine will reject this note into
the reject pocket. Total amount and number of the notes will be displayed on the
home screen.
Press the key to return to the main interface if you confirm the batch number.
Note:
the stacker maximum capacity is 200 bills, so the batch number should be
less or equal to 200.
IMC01 Banknote Counter User Manual Version 1.09
IMC01 Banknote Counter User Manual Version 1.09
Figure 4-18 Batch Setting Interface
Figure 4-19 Batch Number Indicator
