4.4 Counting Speed Setting
4.5 Check Detail of Counting
Page 17
Page 18
IMC01 Banknote Counter User Manual Version 1.09
IMC01 Banknote Counter User Manual Version 1.09
4.6.1 Printer prints banknote data
4.6 Print Information
There are four counting speed options: 1500, 1200, 1000 and 800 (Note: 1500 and
1200 are the only optional in CNT mode). The default speed is 1000 in three
modes. If setting is required, different counting speed can be switched by
pressing the key in any counting mode.
In the MDC or SDC mode, press the key upon the completion of counting to
enter the interface shown in the following figure to check the details of count-
ing.
As shown in Figure 4-22, if the SN reading is on, press the key again, the
banknote’s serial number will be shown in the following figure.
When the external printer has been connected and can be printed, after count-
ing, press the key to enter the print interface shown in Figure 4-23, and then
press the key, the printer starts print.
Figure 4-20 IMC01 Speed Indicator
Figure 4-23 Printer Interface
Figure 4-24 Start Printing
Figure 4-22 Serial Number Information
4.5.1 Check the Serial Number
Figure 4-21 Detail Denomination Information
