1. Lower the machine to its working position in accordance with the instructions in
section 6.2. Rendering the machine to the working position and fold the working
platform stairs (1) down.
Figure. 6.7. - 109. Hopper tarp
2. Detach the two loops (2) of the hopper tarp (1).
3. Pull the cord (3).
There is a spring inside the tarp that will roll it up. Never let the go of the tarp, but
hold the end until the tarp is open.
4. Fill the hopper(s) with seeds and/or fertiliser.
DANGER
Never go under a lifted load.
DANGER
Make sure that nobody is on top of the seed drill or inside the hoppers when the
hoppers are being lled.
DANGER
Avoid breathing seed dressing dust and fertiliser dust. The seed dressing causes a
serious health risk.
DANGER
Read the material safety data sheet of the dressing agent and fertiliser and pay
attention to their warnings.
It is recommended that the hoppers be lled from the side of the hoppers.
We recommend that you open the bulk bags using a knife with a long handle or a
pruning hook.
5. Close the tarp (1) and attach the two tarp loops (2).
6. Fold the working platform stairs up.
When raised, the stairs will be at an approximately 40 degree angle to the
working platform.
Operation and maintenance manual
FX300 and FX400 Comfort
1.00
92 (189)
Содержание FX300 Comfort
