Multiva FX300 Comfort, Руководство по эксплуатации и обслуживанию

Страница: 30 / 189

The hopper level sensors (1) are capacitive sensors located in the hopper. As a standard feature,
there are two hopper level sensors in the machine: one in the seed hopper and one in the
fertiliser hopper on the left side of the machine. Hopper level sensors are also available as an
accessory for the right-hand side hoppers of the machine, in which case the total number of
hopper level sensors will be 4. If the seed or fertiliser level in the hopper is too low, an alarm is
triggered in the Comfort control system.
4.2.1.4. Tramline clutches
Figure. 4.2.1.4. - 17. Tramline clutches
The tramline clutches (1) are located on both sides of the feeder unit. The clutches have been
installed on both the seed and the fertiliser side. The total number of tramline clutches in the
machine is 4. The clutch can be used to disconnect one feeder.
Figure. 4.2.1.4. - 18. Notched feeder roller
The tramline clutch comes with one notched feeder roller (1) as a standard feature. When the
tramline clutch is powered on, the notched feeder roller does not rotate. During seeding, a
tramline is generated when a row is not seeded.
Shaft rotation guards are built into the tramline clutch.
Operation and maintenance manual
FX300 and FX400 Comfort
1.00
30 (189)