RPR 950 Series
9261 – 9558 Issue 1
7
This may be used in conjunction with the clip, or as a separate
method of attachment.
2. CONTROLS AND DISPLAY
3. SWITCHING ON
To switch on your pager, press the ON/Cancel/Recall (OCR)
button once. The pager will emit a short beep and enter a self-
test routine, which will activate the LED, message display and
vibrate motor. The pager will then display its address and any
optional switch-on message that has been programmed. At
the end of this sequence, the display will blank and the pager
will enter its quiescent mode ready to receive calls, showing
either: -
no time, or time of day
If your pager is programmed with the Permanent ON option,
then the switch-on sequence will be automatically initiated
when a battery is fitted.
-- : --
12:05
ON/CANCEL/RECALL
BUTTON (OCR)
ALPHA-NUMERIC MESSAGE DISPLAY
MUTE BUTTON
