RPR 950 Series
9261 – 9558 Issue 1
12
8. RETRIEVING SPEECH CALLS
Your pager will store up to 120 seconds of speech in 5 equal
memory segments, each of 24 seconds duration. It is not
possible to replay a speech message from the memory until
the original call has been completed, but it is possible to close
the speech channel during the original call. Where any speech
message exceeds 24 seconds, then the stored message will
be truncated. When the memory is full, any new message will
overwrite the oldest stored message.
The speech will automatically be replayed, when its
associated message is retrieved from the memory, as
described in Section 7. If the OCR button is pressed at any
time, the replay will be terminated and the next message will
be retrieved. If the MUTE button is pressed and released, then
the message will be re-started again from the beginning.
9. SPEECH (BEEP tone) VOLUME ADJUSTMENT
To adjust the volume of the speech messages and beep tone
where programmed as an option, the pager must be in the
quiescent state. First push the MUTE button, followed by the
OCR button. The display will show the current volume level
and this may then be adjusted by further pressing the OCR
button to increase the volume, or the MUTE button to
decrease. When the desired level is reached, release any
buttons and the pager will return to its quiescent state.
10. ALERT OPTIONS
Your pager has a number of options for alerting you to a call,
which may be selected according to the system requirements
and in some instances, individual needs.
Audible Alerts
Escalert -
a programmable option, which allows the level
of the alert beep to increase on a gradual basis. The
sequence commences with the flashing LED alert only for 4
