RPR 950 Series
9261 – 9558 Issue 1
19
Ensure correct location of
door before closing
Ensure that the battery door is lifted clear of the case and
remove the door. Remove the battery by placing your
forefinger onto the positive end-cap and lifting the battery
upwards, at the same time pushing slightly backwards against
the negative contact spring.
Battery replacement is the reverse sequence. Observing the
correct polarity, place the battery against the negative contact
spring and compress slightly, at the same time pushing the
battery into the compartment and engaging the positive end-
cap against the positive contact in the pager.
To replace the battery
door, firstly ensure
that the lip at bottom
of the door is located
correctly in the recess
at the bottom of the
battery compartment
and gently lower the
door into place,
ensuring not to
damage the rubber
seal. Once closed, compress the door at
the top end and slide the catch back into place.
15. CLIP REMOVAL & REPLACEMENT
Hold the pager in one hand and open the clip to reveal the
metal back-plate.
