![background image](http://html.mh-extra.com/html/multitel-pagliero/160-alu/160-alu_operating-instructions-manual_1856308007.webp)
7
18)
Load all materials on the ground before beginning lifting movements, making sure that the
maximum permissible capacity and number of people is not exceeded. The maximum capacity
indicated includes both people and tools.
19)
Do not fix hooks, cables or ropes to lift material onto the platform.
20)
Do not use the boom of the platform as a crane, do not drag loads.
21)
Do not increase the working height by positioning ladders or stools in the cage.
22)
Do not climb onto the parapet to increase the working height.
23)
Do not use the platform for exhibitions or acrobatics or for jumping with elastic ropes.
24)
It is forbidden to install in the basket or on the structure whatever might increase the wind load
(ex. installation of advertising panels and such,...)
25)
DO NOT TAMPER WITH CONTROL SYSTEMS OR SAFETY DEVICES TO IMPROVE
MACHINE PERFORMANCE.
WORK IN THE VICINITY OF LIVE ELECTRICAL LINES
1)
Should the platform, boom or other parts of the structure come into contact with live wires
which have not been insulated, serious bodily injury may be caused.
2)
If it is necessary to work in the vicinity of live wires, make sure that the safety distances are
complied with and follow the specific procedures agreed to with the parties responsible for
safety.
3)
Before starting to work near electricity lines, make sure that whoever is in charge of the lines
has been notified and that same will not be unexpectedly energised.
4)
In any case, put barriers or shields into place in order to avoid physical contact and electric
arcs.
5)
Possible swaying of the platform and of overhead lines must also be taken into account.
INSULATION
If specifically requested, some platforms can be built with insulation arrangements inserted between
the cage and the boom and between the boom and the turret, or both.
The resistance values at the rated insulation voltage will be tested at the time of delivery. These
values should be checked on a monthly basis to make sure that they do not drop off in time.
The presence of dust, accumulated dirt and an excess of moisture in the air may affect the insulation
negatively even to a drastic extent.
Keep the insulating area clean by washing it with water. Avoid using acids, solvents and sprays of
pressurised or overheated water. Allow to dry before using the machine again.
In the event of servicing or replacement of oil pipes, pay attention to the fact that some pipes may
be of the insulated type without metal braids.
Insulation of the platform does not, in any case, provide protection against electric shocks due to
contact of the operator with two leads or between a lead and earth.
In the stowed position, the insulation no longer has any effect.
Use of a fibreglass-reinforced plastic cage is not sufficient to indicate that the machine is insulated.
Check this requisite carefully before working with energised materials.
Содержание 160 ALU
Страница 8: ...8 MULTITEL 220 ALU AF ...
Страница 23: ...23 ADDITIONAL INSTRUCTIONS FOR PARTICULAR OPTIONS ...