background image

                   5

SAFETY REGULATIONS

LEARNING AND AWARENESS

1)

Do not use the platform before you know exactly how it works. It should only be used by
authorised personnel who have proved themselves capable of doing so safely.

2)

Do not overload the cage in excess of the permissible capacity, taking both the personnel and
their tools and materials into account.

3)

Do not exceed the maximum number of persons allowed onto the platform, as indicated on
the label on the cage.

4)

Do not disassemble any components and do not remove any ballast from the vehicle, since
stability is ensured only if everything is in place on the vehicle as at the time of delivery by us.

5)

Use of the platform is only allowed with wind speeds of up to 45  k.p.h.. Do not use the
platform when the wind speed exceeds this limit.

6)

Do not alter or disconnect the safety devices.

7)

Do not raise the platform when it is loaded on vehicles, ships, scaffolding or other similar
structures.

8)

Keep the floor of the cage and your shoes clean and free from grease or other products which
might make them slippery.

9)

If there are any other raised booms present in the working area, make sure that they will not
interfere with safe operation.

10)

Do not enter the platform if you are not perfectly fit.

11)

When you have finished work, remove the keys from the control panels so as to prevent
unauthorised use.

12)

Do not use the platform if it has not been suitably inspected and serviced. Any problems or
upsets should be reported immediately to the person in charge, and operations should be
suspended until the problem has been eliminated;

13)

Keep the written notices on the machine clearly visible and clean, replacing any that get
mislaid or become difficult to read.

14)

When using welding equipment, do not use the platform for earthing purposes.

15)

Only use the platform in areas where there is sufficient daylight or which are properly illuminated
by artificial lighting.

16)

If any maintenance service has to be performed in areas which can be reached with raised
boom only, the boom itself has to be fixed by means of appropriate belts to a bridge crane or
a normal crane with minimum load capacity of 1000 kg.

Содержание 160 ALU




























Отзывы: