Multitech TalkAnytime TA2410, Руководство пользователя

Страница: 94 / 235

Technical Configuration TalkAnytime User Guide
94
T1 Parameter Definitions (cont’d)
Field Name Values Description
General T1/E1/ISDN Parameters
Line Build Out 0 dB, -7.5 dB,
-15 dB, -22.5 dB
To reduce the crosstalk on received signals, a transmit
attenuator can be placed in the data path. Transmit
attenuation is selectable.
Default: O dB
Pulse Shape
Level 0 to 40 Meters
40 to 81 m
81 to 122 m
122 to 162 m
162 to 200 m
Refers to length of cable between TalkAnytime and
PBX/telco in meters. Most common will be 0 to 40m.
Caller ID Parameters Not applicable to TalkAnytime.
Caller ID
Enable Y/N Turns Caller ID feature on (if checked) and off (if
unchecked).
Calling
Number Prefix
(Caller ID) 0-9, *, #
A DTMF symbol used to mark the beginning of the calling party
number for use with Caller ID. Maximum length: 4 characters.
Calling
Number Suffix
(Caller ID) 0-9, *, # A DTMF symbol used to mark the end of the calling party
number for use with Caller ID.
Maximum length: 4 characters.
Flash Hook Parameters Not applicable to TalkAnytime.
Detect Flash
Hook Y/N This setting determines whether or not the MultiVOIP
responds to hook-flash signals.
Detection Time 100 – 1500
milliseconds
Minimum hook-flash time that will be interpreted as a valid
flash by the MultiVOIP.
Generation
Time 100 – 1500
milliseconds
In some systems, a MultiVOIP might receive a hook-flash signal
from an upstream device (a PBX, voip or other device) and must
replicate it to a downstream device. This parameter determines the
duration of the hook-flash signal that is passed to a downstream
device.
Clocking External/Internal
Set opposite to telco/PBX setting. Example: if telco clocking
internal, set VOIP clocking as external.