![Multitech RouteFinder RF850 Скачать руководство пользователя страница 63](http://html1.mh-extra.com/html/multitech/routefinder-rf850/routefinder-rf850_user-manual_1855773063.webp)
Chapter 6 – RouteFinder Software
Multi-Tech Systems, Inc. RouteFinder RF850/860 User Guide (PN S000400E)
63
Networks & Services > Services
Editing and Deleting User-Added Services
There are options for editing or deleting the user added services. However, there are some standard
services which cannot be edited or deleted. If the service is used by the Packet Filter rules, SNAT, or
DNAT, it cannot be deleted.
For editing any user-defined service, the
Edit
button has to be clicked to get the fields corresponding
to the service entry.
Edit
By clicking
Edit
in the Options column, the information is loaded into the entry menu of the
Edit
Service
screen. You can then edit the entry. You can edit user-added services only. The entries
can be saved using the
Save
button.
Delete
By clicking
Delete
in the Options column, the service is deleted from the Services table.
Changes can be saved using the
Save
button.
Notes About Protocols
1.
TCP & UDP
allow both protocols to be active at the same time.
2.
The
ICMP
protocol is necessary to test network connections and RouteFinder functionality, as
well as for diagnostic purposes. In the
Packet Filter > ICMP
menu you can enable
ICMP
Forwarding
between networks, as well as RouteFinder ICMP reception (e.g., to allow
ping
support).
3.
The
ESP
protocol is required for Virtual Private Network (VPN).
4.
The
AH
protocol is required for Virtual Private Network (VPN).
5.
For
AH
and
ESP
, the
SPI
is a whole number between 256 and 65536, which has been mutually
agreed upon by the communication partners. Values below 256 are reserved by the Internet
Assigned Numbers Authority (IANA).
Entries on This Screen Display on Other Screens
Service Names added on this screen will display on the following screens
Screen Fields
Packet Filter Rules
Add packet filter rules
Packet Filters > Advanced
MAC Address Based Filtering
Network Intrusion Detection
Add specific services for Network Intrusion Detection
SNAT
Add rule
DNAT
Add rule