45
Configuring MultiVOIP Slaves
Deploying the VOIP Network
For a Proprietary Phone Directory database, the VOIP
administrator can deploy the pre-configured slave MVP110s to
their remote sites. The remote site administrators need only
connect power to the pre-configured MVP110, connect the
MVP110 to their Ethernet LAN and predefined telephone
equipment, and then wait for the phone directory database to
be downloaded.
With the
Gatekeeper
option enabled on the
Phone Directory
Database
dialog box, all MVP 110s are configured as
“Gatekeeper” and cannot be downloaded. In this case, each
MVP 110 Phone Book will be programmed with phone
numbers for its own channel. These phone numbers are
registered with the H.323 Gatekeeper (See the “Registering
with a Gatekeeper Phone Directory” section discussed earlier.)
Remote Site Administrator
The following steps are for MVP 110 H.323 endpoints. For
non-MVP 110 H.323 endpoints, refer to the appropriate
installation documentation.
1.
Unpack your MVP 110.
2.
Connect one end of the power supply to a live AC outlet
and connect the other end to the
Power
connection on
your MVP 110 (See Figure 5).
