37
Configuring MultiVOIP Slaves
Feature options are enabled or disabled according to the
interface type. The
Inter Digit Time
option defines the
maximum amount of time that the unit will wait before
mapping the dialed digits to an entry in the Phone
Directory Database. If too much time elapses between
digits, and the wrong numbers are mapped, you will hear a
rapid busy signal. If this happens, it will be necessary to
hang up and dial again. The default is 2
seconds.
6.
The
Ring Count FXS
window allows you to set the
maximum number of rings output on the FXS interface
before hanging up and releasing the line to another call.
The default setting is
8
counts.
Note:
Zero (0) means no rings - caller hears a busy tone.
7.
The
Voice/Fax
tab displays the parameters for the voice
gain, DTMF (Dual Tone Multi-Frequency) gain, voice
coder, faxing, and advanced features such as Silence
Compression, Echo Cancellation, and Forward Error
Correction.
