background image

MultiModem rCell Intelligent Wireless Router 

Multi-Tech Systems, Inc. Quick Start Guide 

the protection of vehicle electronics should be part of the 
installation. 

 

The use of an alert device to operate a vehicle’s lights or horn on 
public roads is not permitted. 

Internal Lithium Battery 

 

A lithium battery located within product provides backup power for 
the timekeeping capability. The battery has an estimated life 
expectancy of ten years. 

 

When the battery starts to weaken, the date and time may be 
incorrect. If the battery fails, the board must be sent back to Multi-
Tech Systems for battery replacement. 

 

Lithium cells and batteries are subject to the Provisions for 
International Transportation. Multi-tech Systems Inc. confirms that 
the Lithium batteries used in the Multi-Tech product(s) referenced 
in this manual comply with 

Special Provision 188 of the UN 

Model Regulations

Special Provision A45 of the ICAO-

TI/IATA-DGR (Air)

Special Provision 310 of the IMDG Code

and 

Special Provision 188 of the ADR and RID (Road and Rail 

Europe)

Warning!

 There is danger of explosion if the battery is incorrectly 

replaced!  

Ship Kit Contents 

Unbundled Package with  

no Accessories 

Bundle Package 

With Accessories 

 1 router 
 1 Quick Start Guide 
 1 MultiModem CD 

 

Note:

  You must supply 

mounting screws, AC or DC 
power supply, and an 
antenna. 

1 router 
1 antenna 
1 Ethernet cable 
1 RS-232 cable 
1 power supply  
1 Quick Start Guide 
1 MultiModem CD 

Note:

 You must supply mounting 

screws 

Note: 

Refer to the User Guide for antenna specifications. 

Содержание MultiModem rCell MTCBA-X-EN2

















Отзывы: