MultiModem rCell Intelligent Wireless Router
12
Multi-Tech Systems, Inc. Quick Start Guide
Configure the Ethernet Interface Using
the Web Management Software
You are now ready to configure the Ethernet interface. This is
accomplished by using the router's factory-installed Web Management
software. The software is accessed through a Web Browser.
1.
From the pc, open a Web Browser.
Type the default Gateway Address:
http://192.168.2.1
Note:
Ensure that the Status LED is blinking, indicating that the
router is ready.
2. Login
After entering the Address, the
Login
screen displays.
●
Type the default User name:
admin
(all lower-case).
●
Type the default password:
admin
(all lower-case).
User Name and Password Note:
The
User name
and
Password
are case-sensitive (both must be typed in lower-case).
A password can be up to 60 characters. If Windows displays the
AutoComplete
screen, you may want to click
No
to tell the
Windows OS not to remember the password; this helps maintain
PC security.
Password
Caution:
It is recommended that you change the
default password to better protect the security of your router. Use
a safe password! Your first name spelled backwards is not a
sufficiently safe password; a password such as xfT35$4 is better.
●
Click the
Login
button. The Web Management Home screen
displays.
3. Use the Setup Wizard for Quick Configuration
A quick way to configure the modem is to use the Wizard Setup in
the Web Management software.
●
To begin configuration, click the
Wizard Setup
button located
under the menu bar.
●
After clicking the
Wizard Setup
button, the
Wizard Setup
screen displays.
